Great advice, exactly as I was planning.
Bryan
_________________________________________________
_________________________________________________
Bryan Welch Direct:(425)947-7002
Tec-Works Inc Fax: (425)821-0596
Total Network Solutions [EMAIL PROTECTED]
www.tec-works.com
_________________________________________________
Jon Lewis wrote:
> On Fri, 8 Jun 2007, Bryan wrote:
>
>> Thanks all for the suggestions. It appears there are 2 fold problems.
>> The previous engineer on this project informed me that the Sup2 was
>> upgraded to 256mb ram (it wasn't) and the MSFC was upgraded to 512 (it
>> wasn't). I've got a sup2 w/ 128 and an MSFC w/ 256.
>
> Unless you're sure you're not going to ever put full routes on it, I
> recommend maxing out the RAM on both the MSFC and Sup2 to 512mb each.
>
> On a 6509/sup2 with full routes and 512/512, I have only 268240496
> free on the sup2. It seems to me, if I had only 256mb RAM on there,
> I'd be in trouble (or maybe it'd have carved off a smaller chunk for
> I/O and I'd be ok). Just max it out and know that you'll never have
> to upgrade the RAM again.
>
> ----------------------------------------------------------------------
> Jon Lewis | I route
> Senior Network Engineer | therefore you are
> Atlantic Net |
> _________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
