That should be the responsibility of the Call Agent... IE MetaSwitch does an AUEP (Audit Endpoint) to a non-existent endpoint every 30 seconds to verify that it's alive:
Jun 19 00:22:11.669: MGCP Packet received from 192.168.2.201:2727---> AUEP 5101985 [EMAIL PROTECTED] MGCP 1.0 <--- Jun 19 00:22:11.673: MGCP Packet sent to 192.168.2.201:2727---> 500 5101985 Endpt Unknown <--- Jun 19 00:22:41.673: MGCP Packet received from 192.168.2.201:2727---> AUEP 5102331 [EMAIL PROTECTED] MGCP 1.0 <--- Jun 19 00:22:41.673: MGCP Packet sent to 192.168.2.201:2727---> 500 5102331 Endpt Unknown <--- -- Tim On 6/18/07, Andriy A. Yerofyeyev <[EMAIL PROTECTED]> wrote: > > Hello group, > > Could you imagine Cisco IAD2431 configured as mgcp gateway ? Let say > mgcp connection failed for some reason (packet loss, external ip > changed, etc.) In that case call agent noticed OOS status of such > gateway and silently waited any message from him. > IAD also have no clue about circumstances which happens between him > and call agent. and remains silent. > > Is there any way to force mgcp device send periodic status updates > (like "hey, i'm alive") to call agent ? > > Thanks , group ! > > -- > > Best regards, > > Andriy A. Yerofyeyev. > Senior Network Engineer. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
