Hi Ian, You need to use the "pre classify" on the virtual template qos pre-classify Search llq for vpn on cco
Brian -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ian MacKinnon Sent: martedì 19 giugno 2007 15.41 To: cisco-nsp@puck.nether.net Subject: [c-nsp] ADSL QOS We are using BT for DSL here in the UK, and I am trying to prioritise voice over the connection. On our L2TP gateway I have :- policy-map 1MegLLQ class voice priority 1000 policy-map shape1Meg class class-default shape average 1000000 service-policy 1MegLLQ interface Virtual-Template1 ip unnumbered Loopback3 ip access-group adsl2-out out no logging event link-status load-interval 30 no snmp trap link-status no peer default ip address ppp authentication chap l2tptunnel ppp authorization l2tptunnel - Ignored: ppp accounting l2tptunnel And I apply the service policy to the user via radius. This is 7200 NPE-G1 running 12.4(2)T5 I can see the policy being applied and a show policy-map interface vi<blah> seems to show it working. But when I send 1Meg of traffic to the CPE the voice to the CPE still breaks up. does anybody have this working? - Done. ---------- Forwarded message ---------- From: "Ian MacKinnon" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Date: Tue, 19 Jun 2007 14:39:26 +0100 Subject: ADLS QOS on 7200 Hi All, We are using BT for DSL here in the UK, and I am trying to prioritise voice over the connection. On our L2TP gateway I have :- policy-map 1MegLLQ class voice priority 1000 policy-map shape1Meg class class-default shape average 1000000 service-policy 1MegLLQ interface Virtual-Template1 ip unnumbered Loopback3 ip access-group adsl2-out out no logging event link-status load-interval 30 no snmp trap link-status no peer default ip address ppp authentication chap l2tptunnel ppp authorization l2tptunnel ppp accounting l2tptunnel And I apply the service policy to the user via radius. This is 7200 NPE-G1 running 12.4(2)T5 I can see the policy being applied and a show policy-map interface vi<blah> seems to show it working. But when I send 1Meg of traffic to the CPE the voice to the CPE still breaks up. does anybody have this working? _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/