8:56am Gert Doering said: > On Sun, Jun 24, 2007 at 07:56:10PM -0400, Sridhar Ayengar wrote: >> There are, after all, those of us who still use it. >> >> OpenVMS is still in production. > > Nothing wrong with that, but why does it have to be *on* by default? > > Even IP/IPv6 isn't enabled on all interfaces by default... >
Exactly. And especially on 12.4T+ trains, Cisco please make it go away by default. Barring that, at least flip the show *conf logic: ! interface GigabitEthernet0/1 no ip address mop enabled ! #show int counters protocol status GigabitEthernet0/1: Other, IP, DEC MOP, ARP, CDP So that when we elect to turn it *off*, parsimony rules: ! interface GigabitEthernet0/1 ip address 192.0.2.0 255.255.255.254 ! #show int counters protocol status GigabitEthernet0/1: Other, IP, ARP, CDP Or even better yet, add a global conf mode command that preemps *all* the interface configs: ! no mop ! Yes, minor peeve, I know. ../C _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
