What do the logs say? If you have a unix box handy stick it on the console and record the messages that come when the system crashes. Is there a reason for that specific code you are using?
Troy Beisigl wrote: > Hi, > > > > We are having a problem with Multilink PPP on a 7507 RSP 8 with 4 VIP2-50s. > The RSP is running 256M and the VIPS are running 128M each. We are running > dCEF due to VoIP QoS needs and have 8 multilink interfaces. 7 of these > multilinks are 2 T1s and 1 is 4 T1s is size. > > > > Our problem is that we seem to have the VIP in slot 4 crashing. We have > replaced the ram first on this and the problem went away for a week. We > replaced the whole VIP next and still have problems. When it crashes, > multilinks that have T1s on that VIP no longer will pass traffic unless we > do full reboot. > > > > VIP #4 has 7 interfaces that are in multilink bundles. It has 14 interfaces > that are running QoS (policy map low latency queueing). We currently are > running IOS Version 12.3(15b). > > > > Does anyone have any ideas as to what is causing this and what we can do to > solve it? > > Troy Beisigl > Network Director > I2B Networks, Inc > 858-715-8500 X 1005 > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
