Hi, Just assumption,
Check Junuper side, may be it has more vlans configured Which doesn't allowed on the Cisco side, and Cisco drop this packets. ----------------------- Sincerely Yours, Konstantin Fedorov -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ras Sent: Tuesday, June 26, 2007 1:42 AM To: Church, Charles Cc: c-nsp Subject: Re: [c-nsp] FE switchport output drops On 25/06/07, Ras <[EMAIL PROTECTED]> wrote: > The entire config is: Several people have suggests 'hold-queue 100 out' to enlarge the queue a little. However for some bizarre reason this command doesn't seem to be present on a 4506 running 12.2(31)SGA, even though the documentation suggests it has been around since at lease 11.0. Anyone know why that might be? :) Thanks, Ras _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
