Hank Nussbacher wrote: > On Tue, 26 Jun 2007, Pelle wrote: > > >> On Tue, Jun 26, 2007 at 11:16:39PM +0300, Hank Nussbacher wrote: >> >> >>> Where can I find a Cisco page that shows which IOS versions that >>> support switchport capability (specifically for 871, 1841, 2501, 2514 >>> and 2610)? >>> >> 871: yes for the LAN-ports, no for the WAN port >> 1841: yes, if equipped with a EtherSwitch-module, e.g. WIC-4ESW or >> HWIC-4ESW >> 25xx: no >> 2610: maybe, if equipped with the EtherSwitch-module WIC-4ESW and it's >> supported (don't know that) >> >> in general, all (H)WIC's which are branded as "Ethernet Switching >> module" does "switchport". in addition the routers in the 87x series and >> 180x is shipped with this module integrated. >> > > Thanks! That helped a lot. Too bad there is no Cisco page which details > all router models and their support of switchport as you did above. >
Forgot to mention that the 2600 will take a NM-16ESW module. http://cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00801aca3e.html Like I said, it's about the modules. =) ~Seth _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
