Local PBR > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:cisco-nsp- > [EMAIL PROTECTED] On Behalf Of Vikas Sharma > Sent: woensdag 27 juni 2007 8:57 > To: [email protected] > Subject: [c-nsp] Prevent traffic originated from the router using access- > list > > Hi, > > How can I stop traffic originated from local router e.g. from loopback > interface of router to go any where? > > I tried with ACL but it permits the traffic as access-list only stop > traffic > passing through the router not originated from the router. > > ========= > access-list 101 deny ip host 192.168.5.254 any > access-list 101 permit any any > > ip access-group 101 out > ========= > > Using below conf i am able to achieve the objective. In that I have > changed > the sourse and destination. Thats correct. > > But I wanted to know can I achieve the same result using sourse as > loopback? > > working conf - > =========== > access-list 102 deny ip any host 192.168.5.254 > access-list 102 permit ip any any > > ip access-group 102 in > ============== > > > > THanks > Vikas Sharma > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
