Hi Eric, Thanks, but what I mean is 802.1X, the authentication protocol, is not the 802.1Q as the VLAN trunking protocol.
-affan On 6/28/07, Eric Kagan <[EMAIL PROTECTED]> wrote: > > > > Hi all, > > > > I want to know is there any way to have my old WS-C3524-XL-EN > > to allow 802.1X ? > > If there are no way to enable this switch to allow dot1x, maybe I have > > to look for another switch. > > > > It supports both ISL and dot1q: > > interface GigabitEthernet0/1 > description Trunk to XXX > switchport trunk encapsulation dot1q > switchport mode trunk > ! > > Config t > (confi)#int g0/1 > (confi)#switchport trunk encapsulation ? > dot1q Interface uses only 802.1q trunking encapsulation when trunking > isl Interface uses only ISL trunking encapsulation when trunking > > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
