On Tue, 3 Jul 2007, Kienzle, John wrote: > We are configuring our routers for a point to point T1 circuit. We are > using a similar config as we have had in the past with T1's. The problem > we seem to be having is the connection goes up and down continuously. In > fact, it will be up for 20 seconds, down for 10 seconds, and then > repeats. It seems like some kind of timing issue, and after verifying no > clocking from the Telco, we configured clocking on one router. That did > not fix it. I believe our lead tech opened a TAC case for assistance, > just wanted to get your thoughts too, before we schedule downtime to > change out and try a different controller card.
What kinds of errors are you seeing, both on the interface and on the controller port? Since you mentioned a T1 controller card, I'm assuming you're using a 7200 or some other PA-based router? jms _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
