On 7/4/07, Matthew Kirkland <[EMAIL PROTECTED]> wrote: > Code Monkey wrote: > > Hi, > > > > Back in 2003 I failed miserably at configuring two 7206 VXR so that > > their FE interfaces could be connected to a VLAN switch, running MPLS > > in one VLAN and non-MPLS in other VLANs. > > We run this quite happily , Have you adjusted the mtu on the interface ? > > tag-switching mtu 1508 > > should make room for both the vlan tag and the mpls tags
OK, since it *is* possible then it must have been either some problem in my 2003 IOS or else (most probably) a problem with the non-Cisco switch I was using at the time, and that I've mostly junked since then. I'll buy my equipment on the assumption that I'll succeed, then, and if I don't I'll be back :-) Thank you. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
