Hi, I am trying to implement the following PBR on 3750 but somehow when i issue the command 'ip policy route-map hpc' on the routed port of the switch it accept it but in sh running it doesn't appear, details are below. Plz suggest what can be wrong.
Regards -Azher L3#sh runn ip routing .......... route-map hpc permit 10 match ip address 21 set ip next-hop 10.10.4.70 ......... interface GigabitEthernet1/0/25 no switchport ip address 192.168.10.17 255.255.255.248 _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
