We just had this crop up last week, with a genuine Cisco WIC. TAC said they have seen it before, and reseating (2-3 times) should resolve the problem.
We have not tried the fix yet, though (would like to know if it works). Notably in our case the T1 interface was administratively down, fwiw. Thanks, Josh > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Seth Mattinen > Sent: Monday, July 09, 2007 6:07 PM > To: [email protected] > Subject: Re: [c-nsp] WIC errors > > Neal R wrote: > > Is it genuine Cisco or a counterfeit? Hint ... 92% off > sales on Ebay > > of Cisco ... aren't. > > I know I have a bunch of counterfeits, but the trouble WIC is a > "stewart" version with a Cisco hologram on the board. As far > as I know, > it's an official one. > > > If not that what version of software are you running? > Seems unlikely > > this would be a code issue but sometimes I ask and find its > blah.bleh.1T > > or something like that for the version, which is definitely > cause for > > considering an upgrade. > > > > 12.4.10a on a 2811. > > ~Seth > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
