We using c7600s3223-adventerprisek9-mz.122-33.SRB1.bin and i allready have configured LDP GR and Yes the ports are on engines can this be a problem ? 2 on first one and other 2 on the second one , this is a logical becouse i loose and line card too but to be sure .
>im going to resolve this On 7/10/2007, "Phil Mayers" <[EMAIL PROTECTED]> wrote: >On Tue, 2007-07-10 at 15:58 +0000, [EMAIL PROTECTED] wrote: >> Ok my ospf coverge in 1-2 seconds in case of fiber cut ot upluging >> cable , ldp too but when i go and make redundancy force-switchover > >OSPF shouldn't have to converge at all using NSF. > >LDP is not SSO-aware in the 12.2SX code. You *WILL* lose adjacencies >performing a switchover if you're using MPLS. 12.2(33)SXH will >apparently fix this, or 12.2(33)SR on 7600s. > >> it take's 30 seconds to converge , strange i mean this is unacceptible > >30 seconds? God, a full converge should take less than that (unless >you're running full or big BGP tables). > >> for rtp protocols :) >> all advices are appreciated . > >Silly question but - the routers at the other end are also SSO/NSF-aware >right? You are aware both ends need support? > >Are you using the ports on the sup? > >I've benched our sup720s performing a switchover in well under a second, >so you're definitely getting something wrong _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
