Hi Rick > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Rick > Sent: Monday, July 16, 2007 11:55 PM > To: c-nsp > Subject: [c-nsp] Debug redistribute > > Is there an equivalent command for debugging redistribution from one > OSPF process to another, on the same 7600 box with a Sup720? Do sh ip protocols to see if you are redistributing the processes
Also do sh ip route on a different route to see if the routes are showing up in the routing table, they should show up as O E2 or O E1 depending on how you have redistributed them You can also do a debug ip ospf events on the router you are doing the redistribution ( use with caution especially on production equipment as it is very resource intensive ) > > The OSPF neighbor state is Full, and I see routes in one database that > are not in the other (redistribution target). You need to do 2-way redistribution Hope this helps Cheers Peter > > My troubleshooting window wont be until next week...are there any show > commands that can determine why? > > > > > Thanks, > Rick > > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
