Hello All, i need to config the Cisco 10K in such a way that it should send accounting start request to Primary RADIUS server and Primary BPM server simultaneously.
In case of failure of either primary server 10K should send the accounting request to respective server i.e. if primary radius fails then account record should go sec radius and primary BPM. Below is the architecture. ----->>>> Cisco 10K <<<<<<<----- Pri Radius server Pri BPM Server Sec Radius Server Sec BPM server. Regards Prit _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
