Hi List, Currently, I have a problem with some PPPoE accounts. I configured a Cisco3640 as NAS, and enable PPPoE. The users that use only one VLAN working fine. However, I have users that uses the same VLAN (different accounts) and the Cisco AAA ACS provide the same IP address:
Vi13 20761 PPPoE 00:00:07 200.110.46.18 Vi14 10080 PPPoE 00:00:00 200.110.46.18 The VLAN (Subinterface) configuration is: ! interface FastEthernet0/0.6 encapsulation dot1Q 6 ip access-group control-full in no ip redirects no ip proxy-arp rate-limit input access-group 140 136000 25500 25500 conform-action set-prec-transmit 5 exceed-action drop rate-limit input 72000 24000 24000 conform-action transmit exceed-action drop rate-limit output access-group 140 136000 25500 25500 conform-action set-prec-transmit 5 exceed-action drop rate-limit output 72000 24000 24000 conform-action transmit exceed-action drop pppoe enable pppoe max-sessions 7 no cdp enable arp timeout 300 end ! Please any suggestion for resolve that issue? Thanks in advanced. Rgds. -- Omar E.P.T ----------------- Certified Networking Professionals make better Connections! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
