I have strange issue with 7507. I have added a new GEIP controller into it. By adding this GEIP controller the CPU usage has been increased up to 20%. The strange thing is that CPU usage is always normal + 20% and there is no traffic on this interface ( even if interface is shutdown the usage remains same ). And if there is traffic it's same J
I can't see the process taking this high CPU utilization if I look into CPU usage stats. What the heck has happened to this? J Here are CPU stats: Router# #show proc cpu | excl 0.00%__0.00%__0.00% CPU utilization for five seconds: 15%/13%; one minute: 15%; five minutes: 13% PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process 5 518320 41974 12348 0.00% 0.11% 0.11% 0 Check heaps 20 66004 924869 71 0.08% 0.01% 0.00% 0 IPC Seat Manager 22 204088 1466063 139 0.00% 0.03% 0.02% 0 ARP Input 31 7080 1609 4400 0.98% 1.44% 0.59% 2 Virtual Exec 52 117672 5843 20138 0.00% 0.02% 0.00% 0 Per-minute Jobs 73 3586004 17990635 199 0.82% 0.60% 0.49% 0 IP Input 189 38964 213398 182 0.00% 0.01% 0.00% 0 IP SNMP 191 56184 104952 535 0.00% 0.01% 0.00% 0 SNMP ENGINE 196 160560 1397067 114 0.08% 0.01% 0.00% 0 BGP Router 197 49200 250208 196 0.00% 0.01% 0.00% 0 BGP I/O IOS version: IOS Version 12.4(3a) Controller Router# sh ver | inc GEIP 1 GEIP controller (1 GigabitEthernet). 1 GEIP controller (1 GigabitEthernet) Regards, Masood Ahmad Shah _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
