This is what I'd recommend:
http://www.rad.com/Article/0,6583,33360-Gigabit_Ethernet_over_STM_1_OC_3_NTU,00.html
Keep the Ciscos out of it, except to supply the GE interfaces to talk to
the RAD box.
Devon True wrote:
All:
I have a customer who is looking to bridge their traffic across an OC3.
(They want to use the same subnet on both sides of the circuit). It
looks like IRB is the method to use, but I am concerned about
performance issues. Normally there is very little traffic across the
OC3, but in a disaster, they could push 75-100Mbps across it.
Any recommendations on hardware/software are appreciated!
--
Devon
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
