What does "show mls qos" show? It is possible to have all the mls qos configurations show up but then forget to globally enable it.
Rich >Message: 8 >Date: Wed, 25 Jul 2007 14:29:00 -0400 >From: Matthew Crocker <[EMAIL PROTECTED]> >Subject: [c-nsp] VoIP QoS on Cisco 2950 series switches >To: Cisco-nsp List <[email protected]> >Message-ID: <[EMAIL PROTECTED]> >Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed > > >Hello, > > I have a Cisco 2950-LRE switch and I'm trying to enable QoS for >some VoIP traffic flowing across the switch. All interesting traffic >has DSCP set to EF. I followed some online docs (auto qos voip >trust) on the interfaces but it doesn't seem to be doing the trick > >any ideas? > >sh version >Cisco Internetwork Operating System Software >IOS (tm) C2950lre Software (C2950lre-I6L2Q4-M), Version 12.1(22)EA4a, >RELEASE SOFTWARE (fc1) >Copyright (c) 1986-2005 by cisco Systems, Inc. >Compiled Fri 16-Sep-05 11:24 by yenanh >Image text-base: 0x80010000, data-base: 0x805B2000 > >ROM: Bootstrap program is C2950lre boot loader > >Crocker_LRE_Spfld uptime is 22 hours, 39 minutes >System returned to ROM by power-on >System image file is "flash:/c2950lre-i6l2q4-mz.121-22.EA4a/c2950lre- >i6l2q4-mz.121-22.EA4a.bin" > >cisco WS-C2950ST-8-LRE (RC32300) processor (revision G0) with 47478K >bytes of memory. >Processor board ID FHK0949R04C >Last reset from system-reset >Running Enhanced Image >2 Gigabit Ethernet/IEEE 802.3 interface(s) >8 Long Reach Ethernet interface(s) >The password-recovery mechanism is enabled. > >32K bytes of flash-simulated non-volatile configuration memory. >Base ethernet MAC Address: 00:15:63:79:5F:00 >Motherboard assembly number: 73-8380-11 >Power supply part number: 341-0039-01 >Motherboard serial number: FOC09483QMF >Power supply serial number: PHI0945K05R >Model revision number: G0 >Motherboard revision number: B0 >Model number: WS-C2950ST-8-LRE >System serial number: FHK0949R04C >SFP Module Board Assembly Part Number: 73-7757-03 >SFP Module Board Revision Number: A0 >SFP Module Board Serial Number: CAT094513KH >CLEI Code Number: CNS6NSMAAC >Configuration register is 0xF > > >Config: > >! >wrr-queue bandwidth 10 20 70 1 >wrr-queue cos-map 1 0 1 >wrr-queue cos-map 2 2 4 >wrr-queue cos-map 3 3 6 7 >wrr-queue cos-map 4 5 >no errdisable detect cause gbic-invalid >mls qos map cos-dscp 0 8 16 26 32 46 48 56 >ip subnet-zero >! >interface GigabitEthernet0/1 >switchport mode trunk >media-type sfp >flowcontrol send off _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
