compare to this.. i assume you are missing routing or ppp isnt really up etc
http://www.thedogsbollocks.co.uk/tech/cisco837-adsl.txt On Mon, Jul 30, 2007 at 03:15:54PM +0200, R.L. Nevot wrote: > Perhaps you have only one public IP address? are you performing NAT? > post your configuration might help > > Regards > > On 7/30/07, fernando fernandes <[EMAIL PROTECTED]> wrote: > > > > hi there... > > i got a cisco 2811 ... with and hwic-adsl ... > > it syncs ok the dsl line .. and it does the ppp connection.. > > but then it doesn't route anything.. don't have acess to outside.... > > the ip route its in place.... but no go :( > > any1 can give me a hand? > > > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/