The feature you are looking for is Layer 2 Local Switching
http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft/120
limit/120s/120s27/fslocal.htm
Robert Crowe
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason Lixfeld
Sent: Wednesday, August 01, 2007 12:35 PM
To: [email protected]
Subject: [c-nsp] EoMPLS Hairpin
Anyone know if this is supported/works:
!
pseudowire-class ATOM-E
encapsulation mpls
interworking ethernet
!
interface loopback0
ip address 1.1.1.1 255.255.255.255
!
interface FastEthernet0/0.100
no ip address
encapsulation dot1q 100
xconnect 1.1.1.1 50 pw-class ATOM-E
!
interface FastEthernet0/0.200
no ip address
encapsulation dot1q 200
xconnect 1.1.1.1 50 pw-class ATOM-E
!
Basically creating a pseudowire across two subinterfaces on the same
physical interface on the same router.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
