Hi,
I have 2 2924's at a *REMOTE* installation that within
the last week or two have started to "reboot" claiming there
was power lost and returned.
One shows :
c2924-1 uptime is 1 hour, 1 minute
System returned to ROM by power-on
System restarted at 20:15:16 EDT Sun Aug 5 2007
System image file is "flash:c2900XL-c3h2s-mz.120-5.WC2.bin"
comes back almost immediately. Because of the site,
I could sorta understand unclean power there. However, plugged
into the same power strip is :
Cisco 3640
Soekris Net 4801
Satellite Modem
Broadband Wireless antenna
And none of them show a reboot.
C3640-1 uptime is 2 days, 4 hours, 16 minutes
System returned to ROM by reload at 17:00:00 EDT Fri Aug 3 2007
System restarted at 17:02:16 EDT Fri Aug 3 2007
System image file is "flash:c3640-jk9s-mz.124-13a.bin"
valhalla# uptime
9:19PM up 9 days, 3:34, 1 user, load averages: 0.04, 0.12, 0.12
The 2nd 2924 is even odder. It takes ALOT longer for it
to finally come back. Sometimes about 10 or 15 minutes, another
time *3* days. And every time to shows "power on".
Besides a better power source (Which I can't believe other
things aren't going down if those 2 are) anything I can do/check?
I won't physically be near them again until Sept 1, so alot of my
debug for now has to be remote.
Thanks, Tuc
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
