http://www.cisco.com/en/US/products/hw/modules/ps2706/products_implementation_design_guide0900aecd80223072.html
"Traffic Hijacking Options In the integrated configuration, there is only one traffic hijacking option-sending an RHI message from the Anomaly Guard to the routing process of the supervisor engine to add a static route to the supervisor engine routing table that names the Anomaly Guard as the next hop. In the dedicated configuration, there is only one option for the first step of the process-sending an RHI message from the Anomaly Guard Module to the supervisor engine on the same Cisco Catalyst 6500 Series switch chassis." Can anyone point me at a Networkers or other resource that explains RHI and/or other internal 6500 service modules in how they "slot" in and "see" traffic in a transparent fashion? There is a bit of info on RHI located at: http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/csm/3.1/configuration/guide/helthmon.html#wp1025239 but not much. Thanks, Hank _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
