Hi, I'm using the internal IOS firmeware i didn't put any patch(modem firmware) yet.
Thanks, Ana Henriques Citando Dennis Breithaupt <[EMAIL PROTECTED]>: > Hi, > > - are you using the IOS internal firmware or of you upgraded it? > (adsl_alc_firmware.bin on flash) > - we had same ugly problems (in germany) with 12.3(11)T1. Problems were > gone with 12.3(11)T11 and additional modem firmware 4.10.158. > > Regards, > > Dennis > > [EMAIL PROTECTED] schrieb: >> Hello i have a router 836 but it can't Sync on a SIEMENS DSLAM. Anyone >> know some IOS version or patch to solve this problem? >> >> The Sh ver of the router: >> #sh ver >> Cisco Internetwork Operating System Software >> IOS (tm) C836 Software (C836-K9O3Y6-M), Version 12.3(2)XC2, EARLY >> DEPLOYMENT RELEASE SOFTWARE (fc1) >> Synched to technology version 12.3(1.6)T >> Technical Support: http://www.cisco.com/techsupport >> Copyright (c) 1986-2004 by cisco Systems, Inc. >> Compiled Thu 04-Mar-04 00:50 by ealyon >> Image text-base: 0x800131E8, data-base: 0x80C7C730 >> >> ROM: System Bootstrap, Version 12.2(11r)YV1, RELEASE SOFTWARE (fc1) >> ROM: C836 Software (C836-K9O3Y6-M), Version 12.3(2)XC2, EARLY >> DEPLOYMENT RELEASE SOFTWARE (fc1) >> >> seg-trf uptime is 6 days, 11 hours, 50 minutes >> System returned to ROM by power-on >> System image file is "flash:c836-k9o3y6-mz.123-2.XC2.bin" >> >> >> This product contains cryptographic features and is subject to United >> States and local country laws governing import, export, transfer and >> use. Delivery of Cisco cryptographic products does not imply >> third-party authority to import, export, distribute or use encryption. >> Importers, exporters, distributors and users are responsible for >> compliance with U.S. and local country laws. By using this product you >> agree to comply with applicable laws and regulations. If you are unable >> to comply with U.S. and local laws, return this product immediately. >> >> A summary of U.S. laws governing Cisco cryptographic products may >> be found at: >> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html >> >> If you require further assistance please contact us by sending email to >> [EMAIL PROTECTED] >> >> CISCO C836 (MPC857T) processor (revision 0x201) with 46695K/2457K >> bytes of memory. >> Processor board ID FCZ091042FL (3935004970), with hardware revision 0000 >> CPU rev number 7 >> Bridging software. >> Basic Rate ISDN software, Version 1.1. >> 1 Ethernet/IEEE 802.3 interface(s) >> 4 FastEthernet/IEEE 802.3 interface(s) >> 1 ISDN Basic Rate interface(s) >> 1 ATM network interface(s) >> 128K bytes of non-volatile configuration memory. >> 12288K bytes of processor board System flash (Read/Write) >> 2048K bytes of processor board Web flash (Read/Write) >> >> Configuration register is 0x2102 >> >> Best Regards, >> Ana Henriques >> _______________________________________________ >> cisco-nsp mailing list [email protected] >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
