I grabbed the 256mb Sandisk Ultra II CF card out of my Canon DSLR and stuck it in a 2801 and it picked it up fine, I can even browse my images (just cant view them). Does IOS have a JPEG to ASCII converter? :-)
I also tested my 1gb Ultra II Sandisk and it was fine aswell. Ive also tested the 256mb card in an 1801 and it was fine there too. Havnt had the chance to get my hands on a 3800 series yet. However, I do get the following message when the router boots up, which doesnt happen with a "Cisco" CF card: amd_flash_cmd(): timeout on erase sector command environment write to NVRAM failed Other than that it seems to work 100% fine. I get the feeling that the only special thing about the Cisco cards is they are available in smaller sizes than what you could buy at a retail store. Who buys 32mb CF cards these days for a camera? I wouldnt take that as "there is no difference" though, as per the output above, there may very well be, but I guess its not a big enough difference that any regular CF card wont work outright. Cheers, Tom ----- Original Message ----- From: "Garry Glendown" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Monday, August 13, 2007 5:11 AM Subject: [c-nsp] CF cards in 3825? > Just wondering - I want to upgrade the 64M CF card in our 3825 with a > larger one - is there anything special about it, or will any - say - > 256MB CF card work? > > Tnx, -gg > > -- > > They who would give up an essential liberty for temporary security, > neiter deserve nor receives either -- B.Franklin > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
