I have a customer who has a PBX that currently uses a T1 interface (They run from the smart jack straight into the PBX). They want to buy 2 T1s and multilink them and send VOIP across that multilink to what amounts to 15 lines into their PBX. I have a NM-HDV with a 1MFT-T1 laying around. Can this card be used to hand the circuit to the customers PBX? I was going to use a 3600 with this card and 2W with 2 T1 CSU/DSU Cards for this location. Is this a decent way to do this or is there a better way?
Richey _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
