Hey folks.... I'm puzzled why this configuration isn't working and looking for a 'second set of eyes'...;)
Incoming T1 is 24X56K and the modems are answering but cannot authenticate... something is missing but not sure what it is... Any help appreciated... relevant parts below... Paul resource-pool disable aaa new-model ! ! aaa group server radius Nexicom server-private xx.xx.xx.xx auth-port 1812 acct-port 1813 key 7 XXXXXXXXXXXXX server-private xx.xx.xx.xx auth-port 1645 acct-port 0 key 7 XXXXXXXXXXXXX ip radius source-interface Loopback0 ! aaa authentication login default group tacacs+ enable aaa authentication ppp Nexicom group Nexicom aaa authorization network Nexicom group Nexicom aaa accounting delay-start aaa accounting exec default start-stop group tacacs+ aaa accounting commands 0 default start-stop group tacacs+ aaa accounting commands 2 default start-stop group tacacs+ aaa accounting commands 3 default start-stop group tacacs+ aaa accounting commands 4 default start-stop group tacacs+ aaa accounting commands 15 default start-stop group tacacs+ aaa accounting network default start-stop group tacacs+ aaa accounting network Nexicom start-stop group Nexicom ! aaa session-id common calltracker enable calltracker history max-size 30 calltracker call-record verbose spe country usa ! spe call-record modem ! spe default-firmware spe-firmware-1 ds0 busyout-threshold 12 ! ! controller T1 3/0 framing sf linecode ami ds0-group 0 timeslots 1-24 type e&m-immediate-start interface Dialer1 ip unnumbered Loopback0 encapsulation ppp no ip mroute-cache dialer in-band dialer idle-timeout 300 dialer-group 1 peer default ip address pool pool_dialup no fair-queue no cdp enable ppp max-terminate 5 ppp max-bad-auth 5 ppp disconnect-cause keepalive lost-carrier ppp authentication pap Nexicom ppp authorization Nexicom ppp accounting Nexicom ppp link reorders ppp timeout idle 7200 ! interface Group-Async0 ip unnumbered Loopback0 encapsulation ppp no ip mroute-cache async mode dedicated peer default ip address pool pool_dialup ppp authentication pap callin group-range 1/00 1/107 ! ip local pool pool_dialup xx.xx.xx.129 xx.xx.xx.254 ! ip radius source-interface Loopback0 tacacs-server host xx.xx.xx.xx timeout 5 tacacs-server directed-request tacacs-server key 7 XXXXXXXXXXXXXXXXXX ! radius-server attribute 44 include-in-access-req radius-server attribute 32 include-in-access-req radius-server attribute 32 include-in-accounting-req radius-server attribute 55 include-in-acct-req radius-server attribute nas-port format d radius-server vsa send accounting radius-server vsa send authentication ! voice-port 3/0:0 ! ! ! ! ! ss7 mtp2-variant Bellcore 0 ss7 mtp2-variant Bellcore 1 ss7 mtp2-variant Bellcore 2 ss7 mtp2-variant Bellcore 3 ! line 1/00 1/107 no flush-at-activation login authentication dialin no modem callout modem Dialin _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
