What is the interface MTU? I think on the PFC-based MPLS the MPLS MTU needs to be lower than the MPLS MTU, but I'm not sure about the OSM.
Phil On Aug 15, 2007, at 6:38 PM, Leonardo Souza wrote: > Hi mates. > I have one 7613 (SUP720-3BXL/MSFC3) router running with an > "Enhanced 4-port OC-3/STM-1 SONET/SDH SM-IR OSM, w/ 4 GE Rev. 1.0" > PID: OSM-4OC3-POS-SI+. > On these GE interfaces we are running MPLS and OSPF, but we are > getting giant frames on them, even with "mpls mtu 1516". > Unfortunately, I don't have this card in my lab. > There is no problem with the optical fibre. > > Anyone has a clue? > Is this module MPLS-aware? i.e. only L2... > > thanks. > > Flickr agora em português. Você clica, todo mundo vê. Saiba > mais. > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
