On Wed, Aug 22, 2007 at 03:55:29PM +0300, Kim Onnel wrote:
> Hi,
>
> Can i replace the WS-6748-GE-TX with WS-6548-GE-TX on a 6513 switch?
>
> someone told me that the 65xx has less features to the 67xx, please
> help me identify what are those lacking features?
This depends on a lot of things. Do you have the CFC or
a DFC? Does the lack of access to the fabric matter to you?
What about the global switching mode? compact/truncated, etc.. all
depend on the series of cards installed.
If you're not pushing the limits, you'll likely not see an
issue. If you expect to get close to line-rate from all the ports,
i'd stick with the 67xx series of cards.
Some commands that may help you decide, or help us with a recommendation:
show platform hardware pfc mode
show fabric switching-mode
show fabric utilization detail
show platform hardware capacity forwarding
- Jared
--
Jared Mauch | pgp key available via finger from [EMAIL PROTECTED]
clue++; | http://puck.nether.net/~jared/ My statements are only mine.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
