Anyone know of any issues that would cause a 2 T1 pipe to be able to use the full download capability but only push 1.5 up?
Here are interface configs Cisco 2620 IOS 12.2 multilink virtual-template 1 ! ! ! interface FastEthernet0/0 ip address 204.XXX.XXX.XXX speed 100 full-duplex ! interface Serial0/0 no ip address encapsulation ppp no fair-queue pulse-time 3 ppp multilink ! interface Serial0/1 no ip address encapsulation ppp no fair-queue pulse-time 3 ppp multilink ! interface Virtual-Template1 ip address xxxxxxxxxxxxxxx ppp multilink ! ip default-gateway 204.XX.XXX.XXX ip classless ip route 0.0.0.0 0.0.0.0 204.XXX.XXX.XXX no ip http server no ip pim bidir-enable Brent Roberts Technical Support Engineer Progressive Solutions [EMAIL PROTECTED] www.progressive-solutions.com _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
