Hello list, The cisco switch is running bare bones configs. The cragon wireless is a bridge with a GigE SFP module, multimode. I am also running with a multi mode cisco sfp When I connect the two together the back haul equipment's GigE interface lights up as it should but the Cisco switch remains unresponsive. all interfaces are unshut and they are set to access mode as well but no response. Debug shows no info at all neither does the logs or SNMP. it remains as though nothing is connected. Anyone come across a similar situation. I am using a Cisco GLC-SX-MM= SFP on the switch. For the back haul I tried both the Cisco SFP and a generic one with the same results.
Best Reagrds Raymond Macharia On 8/18/07, Raymond Macharia <[EMAIL PROTECTED]> wrote: > > Hello list, > I am trying to connect the two switches together for some migration and > they do not connect via the SFP using fiber. however when I connect using > the RJ45 port with copper media it connects without an issue. bot switches > are on auto speed and auto negotiate and no "fancy" configs on either, just > pure default clean switches. > Has anyone encountered this issue even if its with another non-cisco > switch > > best regrads > > -- > Raymond Macharia -- Raymond Macharia _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
