We just stuck a WIC-1DSU-T1 removed from service on a different
router into a 2801. The router says this upon bootup:
%CFG-3-CARD_NOT_SUPPORTED: Slot 3: Unrecognized cookie format for card!sslinit
fn
The version info is:
Cisco IOS Software, 2801 Software (C2801-ADVSECURITYK9-M), Version 12.4(3f),
RELEASE SOFTWARE (fc3)
What could be going on here? We tried all three WIC slots, same
error. Is something basic like T1 WIC support missing from the image,
or do I have a bad or fake WIC? The "show diag" info is below:
WIC/VIC/HWIC Slot 3:
FT1 BT8360
WIC module not supported/disabled in this slot
Hardware revision 1.3 Board revision C0
Serial number 28156561 Part number 800-03279-04
FRU Part Number WIC-1DSU-T1=
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 2
EEPROM contents (hex):
0x20: 02 11 01 03 01 AD A2 91 50 0C CF 04 00 00 00 00
0x30: 60 00 00 00 02 05 14 01 FF FF FF FF FF FF FF FF
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
