I am assuming you mean the interface on the line card is shutdown.   If
so, that is the normal behavior as dCEF is still enabled on a card with
no active interfaces.  (at least it was like this on the 1 port gigE
card I was looking at the other day).


John van Oppen
Spectrum Networks LLC
206.973.8302 (Direct)
http://spectrumnetworks.us 


-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Chris Lane
Sent: Tuesday, September 04, 2007 6:19 AM
To: [email protected]
Subject: [c-nsp] GSR-12008 -----%SYS-2-CHUNKBOUNDS

Anyone experience this CEF memory issue on a line card that is SHUTDOWN?
------------------------------------------------------------------------
------------------------------------------------------------------------
------------------------------------------------
%SYS-2-CHUNKBOUNDS: Could not find the sibling to allocate memory from.
Chunk CEF: 1 path ch, total free 34684 inuse 225716.
------------------------------------------------------------------------
------------------------------------------------------------------------
-------------------------------------------------

This line card has not been configured for use, yet the router is
sending
the message above.

Google search came up with this:
%SYS-2-CHUNKBOUNDS: Could not find the sibling to allocate memory from.
Chunk [chars], total free [dec] inuse [dec]

*Explanation   *A software error occurred.

*Recommended Action   *Copy the error message exactly as it appears, and
report it to your technical support representative



Site is remote, my only hope is to either reseed LC or replace.



Any other suggestions would be appreciated.


Thanks


-- 
//CL
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list  [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Reply via email to