Hi, Thank you for your advices.
I'll check them. Regards, Hiromasa Lincoln Dale (ltd) wrote [2007/09/05 19:24(JST)]: > configuring "ip tcp window-size" on the router has nothing to do with > the IP packets being forwarded _through_ the router. > > a client that cannot complete a TCP session is a classic symptom of an > incorrect MTU somewhere and PMTUD failing to perform its task. > > is your topology really that simple as 3 devices in total? > what MTUs are configured? > what does a ping with sweep of increasing sizes (with DF bit set) show? > are you blocking ICMP traffic? > > > cheers, > > lincoln. > >> -----Original Message----- >> From: [EMAIL PROTECTED] [mailto:cisco-nsp- >> [EMAIL PROTECTED] On Behalf Of Hiromasa Sekiguchi >> Sent: Wednesday, 5 September 2007 6:22 PM >> To: [email protected] >> Subject: [c-nsp] About tcp window size >> >> Hello, >> >> About below condition. >> >> [client]------[cisco3745]-----[Web server] >> >> When TCP connection starts between client and web server, >> they can't finish TCP connection. >> >> The TCP windows scaling is configured with web server. >> >> So, should we change the tcp window size on cisco3745? >> >> e.g. cisco3745(config)#ip tcp window-size 750000 >> >> Regards, >> Hiromasa _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
