Hello List,
Just upgraded one DR 3560 to 7604, and when i tried to apply my standard
tacacs config, got this error:
DRxx-7604.xxxxx.xxx(config)#ip tacacs source-interface loop0
^
% Invalid input detected at '^' marker.
DRxx-7604.xxxxx.xxx#sh ver | i Version
Cisco IOS Software, c7600s3223_rp Software
(c7600s3223_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB, RELEASE SOFTWARE
(fc6)
ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
I tried also:
aaa group server tacacs+ tacmethod
server-private x.x.x key 7 yyyyyy
ip tacacs source-interface Loopback0
but no luck, i can't get a login prompt.
I have another 7604, but with ver: Version 12.2(18)SXF6, and the same
config is working just fine.
Any ideea?
Thanks.
Bogdan
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
