It's likely a problem with the NAT box, sometimes called "VPN Passthrough". Some of them cannot track/control more than one session. Netgear is one of the few that clearly documents this: http://kbserver.netgear.com/kb_web_files/n101222.asp
Regards, Frank -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Messier Sent: Wednesday, September 26, 2007 8:44 AM To: [email protected] Subject: [c-nsp] pix vpn problem Hello, A customer has a Cisco Pix (6.3) with remote users using the cisco vpn client. When they have two remote people behind the same NAT box (which we don't control, perhaps in a hotel) then only one of them can be connected at a time. When the second tries to connect, the first gets disconnected. Is this likely to be a problem with the (unknown) NAT box, or on the PIX? If on the PIX, is it fixable? Thanks, -mark _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
