I want to throw in Procera Networks PacketLogic to the DPI alternatives aswell, this is really a box to concider :)
Simply rate-limiting the users can most probably still be done in the Linux up to atleast 200megs. 3 okt 2007 kl. 18.15 skrev Mark Pace Balzan: > > Hi, > > >> Are there another platforms (Cisco and other >> vendors) which >> could shape such amount of customers on 100 Mbit/s and higher speeds? >> > > The C7200 as you mention would do shaping for you. > Shaping, BGP, and NAT on a NPE-G1 with 200Mbps traffic in my > experience > is pushing the performace of the box a little more that I would be > comfortable with. Havent played with the G2 so far. > > You can also have a look at dedicated DPI boxes. > Cisco does the SCE (previously pcube), and there are many others: > packeteer, allot, sandvine > These may be nice as they are L2 bridges that don't require drastic > topology changes. > However I believe it works our more expensive that a c7200 > > >> In case of cisco I am thinking about 7200 router. Can anybody >> tell what >> number of shapers/policers are supported on 2811 and 7200 and >> how well could >> 7200 perform shaping of such amount of customers on that speed in >> real >> environment? > > With those features enabled (bgp,qos,nat) you'll reach the CPU limit > before you reach any policer limits. > > > > Cheers > > > Mark > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
