http://www.verio.com/support/documents/view_article.cfm?doc_id=482
ignored is the buffer or buffer ring filling up (depends on architecture). Show buffers is the customary next step. On 10/11/07, Andrew Gristina <[EMAIL PROTECTED]> wrote: > http://www.verio.com/support/documents/view_article.cfm?doc_id=482 > > ignored is the buffer or buffer ring filling up (depends on architecture). > > On 10/11/07, Ras <[EMAIL PROTECTED]> wrote: > > I have a 2811 deployed at a customer site, with Fa0/0 facing a 100M > > circuit back to me and Fa0/1 facing the customer. > > > > Each interface is clocking up (albeit at varying rates) a bunch of > > input errors that are 'Ignored': > > FastEthernet0/0 is up, line protocol is up > > 7 input errors, 0 CRC, 0 frame, 0 overrun, 7 ignored > > > > As far as I can tell the interfaces aren't overloaded (~3M peak), > > there are plenty of buffers to go around and the CPU/memory seem > > happy. > > > > This router really does very little, although it is multicast routing > > but again only 2-3M peak. > > > > I've read the Cisco docs on debugging these errors but havn't been > > successful in eliminating them, including after a reload. > > > > Does anyone know how to dig deeper into this / find out what is causing > > this? > > > > Thanks, > > Ras > > _______________________________________________ > > cisco-nsp mailing list [email protected] > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
