Could look at Performance Routing (PfR) formerly OER. http://www.cisco.com/en/US/products/ps6599/products_data_sheet0900aecd806c4e e4.html
http://tinyurl.com/25egvd David -- http://dcp.dcptech.com > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Rivo > Tahina RAZAFINDRATSIFA > Sent: Thursday, October 18, 2007 8:44 AM > To: [email protected] > Subject: [c-nsp] Two connections to upstream > > Hi all, > > We have 2 connections to the same upstream, the main one with 4Meg > and a second one with 2M. They are now used at the same time, is > there any way to use the second one only when the main 4M is > fully loaded? > > Kind regards. > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
