G'day, I built a new 3750 stack today and I couldn't manage to bring all 7 members in. The members are a 48-port gige, 2x24 port gige, 3 x 48 port 10/100 and 1 x 24 port 10/100. This failed switch is a 24-port gige 3750.
00:29:57: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 5 has changed to state UP 00:30:07: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack 00:30:02: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (NewCoreStack-4) 00:17:33: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (NewCoreStack-5) 00:30:05: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (NewCoreStack-2) 00:30:02: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (NewCoreStack-3) 00:30:04: %STACKMGR-4-SWITCH_ADDED: Switch 6 has been ADDED to the stack (NewCoreStack-7) 00:30:47: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 5 has changed to state DOWN 00:30:50: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 5 has changed to state UP 00:30:51: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 5 has changed to state DOWN 00:30:52: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 5 has changed to state UP 00:30:54: %STACKMGR-4-STACK_LINK_CHANGE: Stack Port 2 Switch 5 has changed to state DOWN 00:31:08: %STACKMGR-4-SWITCH_REMOVED: Switch 6 has been REMOVED from the stack 00:31:08: %CFGMGR-1-UNABLE_TO_SEND_RUN_CFG: unable to send running-cfg, bits: 0x007E, retrying... 00:31:04: %STACKMGR-4-SWITCH_REMOVED: Switch 6 has been REMOVED from the stack (NewCoreStack-4) On switch-6: Waiting for Stack Master Election (around 30 seconds)... POST: PortASIC CAM Subsystem Tests : Begin POST: PortASIC CAM Subsystem Tests : End, Status Passed POST: PortASIC Stack Port Loopback Tests : Begin POST: Found Stack port 1 Down POST: Found Stack port 2 Down POST: Skipping Stack port External loopback POST: PortASIC Stack Port Loopback Tests : End, Status Passed POST: PortASIC Port Loopback Tests : Begin POST: PortASIC Port Loopback Tests : End, Status Passed Election Complete Switch 6 booting as Member, Switch 1 elected Master Waiting for Port download... <hangs here> I've replaced and reseated the stack cables in switch-6; all the switches were upgraded to SEE3. I ran out of time before I could try inserting this switch elsewhere. %CFGMGR-1-UNABLE_TO_SEND_RUN_CFG in documentation says "copy the entire line and copy it to Cisco TAC". I thought I'd try here before I try my hand at the TAC. Has anyone seen this before and have any tips for figuring out what the hell is going on? I'd love to enable some more debugging on the stack slave to get more of an idea of why its hanging. Adrian _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
