Alex, To tell you the truth, your utilization of this router is quite impressive. I would suggest you get another one (maybe 7201, which is stronger), and start splitting the services a bit between the two routers...
Arie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alex A. Pavlenko Sent: Thursday, November 01, 2007 14:19 PM To: [email protected] Subject: [c-nsp] 7301 load Hi! Our company is a city ISP and we have a 7301 router to connect our metro network to Internet. Router runs BGP with 10 peers, 3 of them are upstreams and provide us with full routing table. Also it performs inter vlan routing in a "router on a stick" manner(150 VLANs) and intra-AS routing(~600 subnets) using an OSPF as IGP. Other features configured are DHCP-relay,authorized ARP, netflow-export, traffic-shape(6 pipes), policy-routing(on 30 subinterfaces) and ACL. Only one of three routers gigabit ethernet interfaces currently in use. Currently we have CPU load between 75 and 95% and interface load 500-600Mb/s, 90-120 Kpps each direction. What do you think, is CPU load normal relative to interface load? If not then which things should be checked to lower down CPU usage? Thanks. Alex. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
