-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi,
Just wondering if anyone can shed any light into my confusion. In looking at a c4506 switch which has ospf running with ip default-network 0.0.0.0 / ip default-gateway statements. Not sure the reason for these statements when there's routing enabled. I also understand that these statements will route packets when there's no exact match in the routing table. Also the default route announced using the ip default-network command is not propagated by ospf. Anyway, so being part of maintenance, I reconfigured the switch from area 2 to area 0 with its existing configuration and right after that I lost its default route even after the LSA was propagated between neighbors. So the first thing I did was to clear the routes include ospf database and the default route appeared back, then about a minute I lost the default route again. So this time I removed the ip default statements which didn't make sense to begin with and this time my default route was restored/stable. So I jumped onto others switches and noticed they were running ospf with the ip default statements w/o any problems? I'm still little confused with this. Any insight will be appreciated. regards, /virendra -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2.2 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFHOITnpbZvCIJx1bcRAvZvAJ9CzSA2GIcG5LkxIobFRfC1jh2VeACfds5A fx93yFFBtBFKFI/55dCGDuM= =LQGv -----END PGP SIGNATURE----- _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
