Use "secondary vlan" - G
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ruben Alvarez Sent: Monday, November 12, 2007 3:24 PM To: [email protected] Subject: [c-nsp] Cat6509 and transparent firewall Hello, I have a client with a transparent firewall connected to my Cat 6509. Its running PF firewall running on a server and currently I have then on a VLAN with an interface VLAN as their gateway. The client has requested more IP addresses. They don't want to renumber and I can't expand their current /28 so I'm trying to think of a way to route another subnet to them. My first thought was to give them another VLAN and turn their switchport to a trunk, but I don't know if a firewall like that can trunk with a Cisco switch. Anyone have any ideas about this? The firewall has no IP address for it is a bridge. Thanks. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
