Hi,
I'm trying to rate limit traffic using class-maps.
I believe I've got the config right to police the traffic, however,
I'm not getting the rates I want.
config goes like:
ip routing
mls qos
!
class-map match-all interesting
match access-group 1
!
policy-map interesting
class interesting
police 32000000 320000 exceed-action drop
!
access-list 1 permit x.x.x.x
int fa1/0/23
service-policy input interesting
We have workstation x.x.x.x on port 23, sending data to another host
on a distant network. Using iperf to send tcp traffic (defaults) we
get a rate of approx 12mb/s. I want to have a max of 15mb/s for
'interesting' traffic. Can anyone tell me where I'm going wrong?
The software I'm running is ip services 12.2(25)SEB4 on a 3750.
Cheers,
W
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
