On Nov 20, 2007, at 8:54 AM, Jeff Fitzwater wrote: > We are runnning it on a 720-3B with aprox 30 SVIs and aprox 150 L2 > ports that are associated with the SVI vlans. As soon as I enable > the MLS (hardware switched flows) portion of the netflow, the switch > CPU jumps up to around 50-80.
I've seen 60% on the SP with a consistently full netflow table on a 3BXL. Since it is on the SP cpu, we haven't been particularly concerned. > Since we want to collect all flows, we > do not want to do sampled flows. Good thing you don't want it, because the 6500 can't do hardware sampling. Dale ---------------------------------- Dale W. Carder - Network Engineer University of Wisconsin at Madison http://net.doit.wisc.edu/~dwcarder _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
