hi, both SPA's are supported in SIP-400, but SPA-2X1GE-V2 works only inside 7600 chassis. it's not supported in 6500's. this quite important information you can only find in release notes to 12.2SR: http://cisco.com/en/US/products/ps6922/prod_release_note09186a00806c096f.html
ivan On Sunday 18 November 2007, Arie Vayner (avayner) wrote: > Tim, > > Take a look here: > http://www.cisco.com/en/US/partner/products/hw/routers/ps368/produc >ts_da ta_sheet0900aecd8027c9e6.html > > It can support both SPA: > * 2-port 1 GE SPA (V1 and V2) > > For the V2 SPA's take a look here: > http://www.cisco.com/en/US/partner/products/hw/routers/ps368/produc >ts_da ta_sheet0900aecd804d884d.html > > For the V1 SPA's take a look here: > http://www.cisco.com/en/US/partner/products/ps6267/products_data_sh >eet09 00aecd80351ee0.html > > Arie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Tim Durack > Sent: Friday, November 16, 2007 20:01 PM > To: Cisco-nsp > Subject: [c-nsp] SPA-2XGE vs SPA-2X1GE-V2 > > Anyone know what the difference is between the SPA-2XGE and the > SPA-2X1GE-V2? > > Will both work in a 6500/SIP-400 combo? I'm assuming yes, but can't > find any docs that indicate the differences if any. > > Thanks, > > Tim:> _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
