Just to let you guys know... I got the answer, from a pure circuit standpoint, no; And it can't be considered a cross connect. I would need external MUX/DACS system to do that.
Regards, Masood Ahmad Shah -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Masood Ahmad Shah Sent: Saturday, December 01, 2007 1:11 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] ATM Switching Design Issue I want to use Cisco 3660 for atm aggregation. Like I have two IMA 4 port E1 Port adapter modules, ATM OC3, multimode Port adapter, 1 port and they all comes in the same chassis Cisco 3660. I want to know is it possible with Cisco 3660, Does 3660 support it if the answer is yes then how can I make cross connect between multiple IMA interfaces and OC3 interface in single chassis; and then further I can connect that OC3 interface to upstream OC3 router. ---------------------------Cisco3660-------- ---|---Cisco 7507 4 E1 ------------- \ atm crossconnect ATM IMA ----------ATMOC3-----|------------ATM-OC3 4 E1 ------------/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/