Hello, I try to use SNMPv3 on CatOS without success.
I use the following configuration: set snmp user snmpuser authentication md5 <password> privacy <password> set snmp group readonly user snmpuser security-model v3 set snmp access readonly security-model v3 privacy read defaultAdminView When i try snmpwalk, i get: Error in packet. Reason: authorizationError (access denied to that object) Failed object: SNMPv2-SMI::mib- Google and the Cisco documentation don't help. Anyone using SNMPv3 with success on CatOS can send me the 'set snmp' lines used ? On a WS-C3508G-XL running 12.0(5)WC17, i have configured the group with success by using: 'snmp-server group readonly v3 auth read readview' but i can't setup SNMPv3 user using 'snmp-server user snmpuser readonly v3 auth md5 <password>', the command don't exist in the CLI: Switch(config)#snmp-server ? trap-timeout Set timeout for TRAP message retransmissions view Define an SNMPv2 MIB view Anyone use SNMPv3 on switch running 12.0(5) ? Thank you ! Best Regards, -- [REDACTED] _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
