Just to answer everyones questions here's the story. One end has a 7206 NPE G1 with 1 gig of ram other end has 7204 NPE 300 with 256 megs of ram Each router has a PA-MC-T3= (the channelized ds3 card) We do have a ds3 it just has channels 1-5 stripped of it to do voice between the locations. I would like to use the rest of the DS3's bandwidth for data but I can't seem to find a way to do that without just using a crap load of T1's put into multilink bundles. Any ideas? Thanks Joseph
________________________________ From: Doug Clements [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 04, 2007 5:10 PM To: Joseph Jackson Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] multilink bundle On Dec 4, 2007 4:49 PM, Joseph Jackson <[EMAIL PROTECTED]> wrote: Would it be considered retarded to put 23 T1's into a multilink bundle? I wouldn't try it, but assuming you're running 7500, there are hardware limitations: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/120newft /120t/120t3/multippp.htm#wp1025005 --Doug _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/